73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Seat LHD)
w/ Vertical Adjuster:
| *a | Convex |
Install the front seat inner belt assembly LH with the nut.
42 N*m (428 kgf*cm, 31 ft.*lbf)
Do not place the front seat inner belt assembly LH over the convex areas of the separate type front seat cushion spring assembly.
Engage the clamp.
Engage the 5 clamps.
Engage the 3 hooks.
w/o Vertical Adjuster:
| *a | Convex |
Install the front seat inner belt assembly LH with the nut.
42 N*m (428 kgf*cm, 31 ft.*lbf)
Do not place the front seat inner belt assembly LH over the convex areas of the separate type front seat cushion spring assembly.
Engage the clamp.
Engage the 4 clamps.
Engage the 4 hooks.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Seat RHD)
| *a | Convex |
Install the front seat inner belt assembly with the nut.
42 N*m (428 kgf*cm, 31 ft.*lbf)
Do not place the front seat inner belt assembly RH over the convex areas of the separate type front seat cushion spring assembly.
Engage the clamp.
Engage the 3 clamps.
Engage the 3 hooks.
73230
3.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Seat)
| *a | Convex |
Install the front seat inner belt assembly with the nut.
Do not place the front seat inner belt assembly RH over the convex areas of the separate type front seat cushion spring assembly.
4.INSTALL FRONT SEAT ASSEMBLY