Use the same procedure for the LH and RH sides.
The procedure described below is for the LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY
w/o Projector Headlight:
Connect the 3 connectors.
w/o Projector Headlight:
Connect the 3 connectors.
Engage the 2 clamps to connect the wire harness.
Engage the claw to install the headlight assembly.
Install the radiator support cushion.
Install the bolt and screw.
2.INSTALL FRONT BUMPER ASSEMBLY
3.ADJUST HEADLIGHT AIMING
4.ADJUST FOG LIGHT AIMING (w/ Fog Light)