Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Sedan) › 2013.08–2017.10
RM30M0E _59 Vehicle Exterior _017126 LIGHTING (EXT) _0092609 HEADLIGHT ASSEMBLY(for Sedan) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Sedan)  DISASSEMBLY  


PROCEDURE

Hide 81110B 1.REMOVE NO. 1 HEADLIGHT BULB (w/o Projector Headlight)

a.
E270926

Remove the socket cover.


b.
E270927N01
1.885,1.625 2.177,1.875 0.292,0.25 10 true (1) 0.969,1.208 1.208,1.427 0.24,0.219 10 true (2)

Release the set spring in the direction indicated by the arrow in the order shown in the illustration.


c.
E270928

Remove the No. 1 headlight bulb.

NOTICE:

Do not touch the No. 1 headlight bulb glass.



Hide 81110B 2.REMOVE NO. 1 HEADLIGHT BULB (w/ Projector Headlight)

a.
E270933

Turn the socket cover in the direction indicated by the arrow shown in the illustration to remove it.


b.
E272660

Disconnect the connector.


c.
E272661

Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

NOTICE:

Do not touch the No. 1 headlight bulb glass.



Hide 81510C 3.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.
E270931

Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the front turn signal light bulb from the front turn signal light socket.


Hide 81610F 4.REMOVE CLEARANCE LIGHT BULB (w/o Projector Headlight)

a.
E270929

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the clearance light bulb from the clearance light socket.


Hide 81610F 5.REMOVE CLEARANCE LIGHT BULB (w/ Projector Headlight)

a.
E275995

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.


b.

Remove the clearance light bulb from the clearance light socket.