Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender Type Side Turn Signal Light)
RM30M0E _59 Vehicle Exterior _017126 LIGHTING (EXT) _0092611 SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender Type Side Turn Signal Light) A

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY(for Front Fender Type Side Turn Signal Light)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81740 1.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY

a.
E272636
1.563,1.875 1.781,2.135 0.219,0.26 10 true (1) 2.573,1.698 2.854,1.969 0.281,0.271 10 true (2)

Disengage the 2 claws to separate the side turn signal light assembly as indicated by the arrows in the order shown in the illustration.


b.

Disconnect the connector to remove the side turn signal light assembly.