Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Sedan) › 2013.08–2017.10
RM30M0E _59 Vehicle Exterior _017126 LIGHTING (EXT) _0092613 REAR COMBINATION LIGHT ASSEMBLY(for Sedan) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Sedan)  DISASSEMBLY  


PROCEDURE

Hide 81552A 1.REMOVE NO. 2 REAR COMBINATION LIGHT BODY GASKET

a.
E276242

Remove the No. 2 rear combination light body gasket.

NOTICE:
·

Be sure to remove all the traces of the old No. 2 rear combination light body gasket from the vehicle body.

·

Do not reuse the removed No. 2 rear combination light body gasket. Be sure to install a new No. 2 rear combination light body gasket to prevent water ingress.




Hide 81562A 2.REMOVE REAR COMBINATION LIGHT GASKET

a.
E271681

Remove the rear combination light gasket.

NOTICE:
·

Be sure to remove all the traces of the old rear combination light gasket from the vehicle body.

·

Do not reuse the removed rear combination light gasket. Be sure to install a new rear combination light gasket to prevent water ingress.




Hide 81550L 3.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E271682

Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration, and separate them as a unit.


b.

Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.


Hide 81550N 4.REMOVE BACK UP LIGHT BULB

a.
E271799

Turn the rear combination light socket and wire sub-assembly with the back up light bulb in the direction indicated by the arrow shown in the illustration, and separate them as a unit.


b.

Remove the back up light bulb from the rear combination light socket and wire sub-assembly.


Hide 81550H 5.REMOVE TAIL AND STOP LIGHT BULB

a.
E271801

Turn the rear combination light socket and wire sub-assembly with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration, and separate them as a unit.


b.

Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly.


Hide 81565 6.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.
E271803

Disengage the 2 clamps to remove the rear combination light socket and wire sub-assembly.