81565
1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY
Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.
81550H
2.INSTALL TAIL AND STOP LIGHT BULB
Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.
81550N
3.INSTALL BACK UP LIGHT BULB
Install the back up light bulb to the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the back up light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.
81550L
4.INSTALL REAR TURN SIGNAL LIGHT BULB
Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.
81562A
5.INSTALL REAR COMBINATION LIGHT GASKET
Install a new rear combination light gasket.
Be sure to remove all the traces of the old rear combination light gasket from the vehicle body.
Do not reuse the removed rear combination light gasket. Be sure to install the rear combination light gasket to prevent water ingress.
81554B
6.INSTALL NO. 2 REAR COMBINATION LIGHT BODY GASKET
Install a new No. 2 rear combination light body gasket.
Be sure to remove all the traces of the old No. 2 rear combination light body gasket from the vehicle body.
Do not reuse the removed No. 2 rear combination light body gasket. Be sure to install the No. 2 rear combination light body gasket to prevent water ingress.