84306
1.REMOVE SPIRAL CABLE SUB-ASSEMBLY
84650
2.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
| *a | Protective Tape |
Disconnect the 2 connectors.
Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the windshield wiper switch assembly.
Do not press the claw too hard, as it may be damaged.
84140
3.REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY
Disconnect the connector.
Using pliers, expand the clamp as shown in the illustration.
While holding the clamp expanded, disengage the claw and 2 guides to remove the headlight dimmer switch assembly.