Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM30M0E _59 Vehicle Exterior _017121 WINDOW / GLASS _0092749 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 1.REPAIR REAR WINDOW DEFOGGER WIRE

B106758
1.052,0.573 0.5,1.083 0.5,1.083 1.104,1.01 true 1.708,0.979 1.708,1.458 true 2.833,0.885 2.833,1.115 false 1.646,1.479 2.01,1.802 0.365,0.323 10 false *c 0.333,1.042 0.615,1.281 0.281,0.24 10 false *a 2.781,1.146 3.125,1.542 0.344,0.396 10 false *b
*a Masking Tape
*b Broken Wire
*c Repair Point


a.

Clean the broken wire tips with a grease, wax and silicone remover.


b.

Place masking tape along both sides of the wire.


c.
B106759

Thoroughly mix the repair agent (DuPont paste No. 4817 or equivalent).


d.

Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not use the rear window defogger for at least 24 hours after performing the repair.