Home › Vehicle Exterior › WINDOW / GLASS › RELAY
RM30M0E _59 Vehicle Exterior _017121 WINDOW / GLASS _0092750 RELAY G

WINDOW / GLASS  RELAY  INSPECTION  


PROCEDURE

Hide 85912 1.INSPECT DEFOGGER RELAY

a.
E209082

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the defogger relay.