Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE LINE
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092754 BRAKE LINE L

BRAKE SYSTEM (OTHER)  BRAKE LINE  PRECAUTION  


TROUBLESHOOTING PRECAUTION



NOTICE:
·

Since the brake lines are classified as critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.

·

When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.

·

Do not damage or deform the brake lines when removing or installing them.

·

When installing a grommet to the body, securely insert the grommet to the body.

·

When installing a brake tube or flexible hose, ensure that they are free from twists or bends.

·

If the cap of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.

·

Flexible hoses must be free from shock absorber oil, grease, etc.

·

When installing a brake tube to a plastic clamp, ensure that the brake tube is not loose or pinched.

·

Do not reuse any clips or plastic clamps removed from a flexible hose.

·

After installing a brake tube or flexible hose, ensure that they do not interfere with any other components.

·
C102779
0.958,1.396 0.958,1.771 false 1.708,0.896 1.854,0.625 false 2.219,3.479 2.219,3.854 false 2.948,2.833 3.094,2.563 false 0.094,0.042 0.271,0.219 0.177,0.177 10 false *a 0.094,2.365 0.271,2.542 0.177,0.177 10 false *b 3.125,2.448 3.302,2.625 0.177,0.177 10 false *d 0.885,1.771 1.042,1.948 0.156,0.177 10 false *c 2.156,3.854 2.313,4.031 0.156,0.177 10 false *c 1.896,0.51 2.073,0.688 0.177,0.177 10 false *d
*a Disconnecting
*b Connecting
*c Hold
*d Turn


When disconnecting and connecting a flexible hose and brake tube:

1.

Hold the flexible hose with a wrench and disconnect the brake tube with a union nut wrench without deforming the tube.

2.

Remove the clip.

3.

Install a new clip.

4.

Connect the brake tube with a union nut wrench without deforming the tube.


·
C219569
2.149,0.237 2.32,0.404 0.17,0.167 10 *a 2.04,0.571 2.176,0.406 false 0.844,1.118 0.708,0.953 false 0.554,0.75 0.724,0.917 0.17,0.167 10 *b 1.469,2.626 1.225,2.626 false 1.03,2.541 1.182,2.697 0.153,0.155 10 *1
*1 Way
*a Turn
*b Hold


When connecting a brake tube and way:

1.

Support the way to prevent deformation of the brake tube and connect the brake tube to the way with a union nut wrench.

2.

Support the way to prevent deformation of the brake tube and install the bolt to secure the way to the body.