47299
1.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
Install the brake master cylinder reservoir strainer to the brake master cylinder reservoir assembly.
47230
2.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
Install the brake master cylinder reservoir filler cap to the brake master cylinder reservoir assembly.
47255
3.INSTALL MASTER CYLINDER RESERVOIR GROMMET
Apply lithium soap base glycol grease to 2 new master cylinder reservoir grommets.
Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.
47220D
4.INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
Install the brake master cylinder reservoir assembly to the brake master cylinder body.
Fix the brake master cylinder body in a vise between aluminum plates.
Do not overtighten the vise.
Using a 5 mm pin punch and a hammer, tap in the straight pin.