Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM SWITCHING VALVE › 2013.08–2016.04
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092760 VACUUM SWITCHING VALVE A

BRAKE SYSTEM (OTHER)  VACUUM SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 25860 1.INSTALL VACUUM SWITCHING VALVE ASSEMBLY

a.

Install the vacuum switching valve assembly to the hose bracket with the nut.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the No. 2 air hose and No. 3 air hose to the vacuum switching valve assembly with the 2 hose clips.


c.

Connect the vacuum switching valve assembly connector.