Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(for RHD)
RM30M0E _54 Brake _017099 BRAKE SYSTEM (OTHER) _0092764 BRAKE MASTER CYLINDER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for RHD)  DISASSEMBLY  


PROCEDURE

Hide 47220D 1.REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY

a.
C231241

Fix the brake master cylinder body in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using a 5 mm pin punch and a hammer, tap out the straight pin.


c.

Remove the brake master cylinder reservoir assembly from the brake master cylinder body.


Hide 47255 2.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.

Remove the 2 master cylinder reservoir grommets from the master cylinder reservoir assembly.


Hide 47230 3.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

a.

Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.


Hide 47299 4.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER

a.

Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.