1.INSPECT BRAKE BOOSTER
Airtightness check.
| *a | Correct |
| *b | Incorrect |
| *c | 1st |
| *d | 2nd |
| *e | 3rd |
Start the engine and stop it after 1 or 2 minutes. Slowly depress the brake pedal several times.
If the pedal can be depressed to the floor the first time, but on the 2nd and 3rd times cannot be depressed as far, the brake booster assembly is airtight. If not, inspect the brake vacuum check valve assembly.
If the brake vacuum check valve assembly is normal, replace the brake booster assembly.
Depress the brake pedal while the engine is running, and stop the engine with the brake pedal depressed.
If there is no change in the pedal reserve distance while holding the pedal for 30 seconds, the brake booster assembly is airtight. If not, inspect the brake vacuum check valve assembly.
If the brake vacuum check valve assembly is normal, replace the brake booster assembly.
Operation check.
Depress the brake pedal several times with the engine stopped and check that there is no change in the pedal reserve distance when the pedal is depressed.
Depress and hold down the brake pedal, then start the engine.
If the pedal goes down slightly, operation is normal. If not, inspect the brake vacuum check valve assembly.
If the brake vacuum check valve assembly is normal, replace the brake booster assembly.