1.REMOVE REAR WHEEL
2.DRAIN BRAKE FLUID
If brake fluid leaks onto any painted surface, immediately wash it off.
47319F
3.REMOVE REAR FLEXIBLE HOSE
Using a 10 mm union nut wrench, disconnect the 2 brake tubes while holding the rear flexible hose with a wrench.
Do not kink or damage the brake line.
Do not allow any foreign matter such as dirt and dust to enter the brake line.
Remove the 2 clips and rear flexible hose.
47316A
4.REMOVE REAR BRAKE TUBE FLEXIBLE HOSE (for Rear Disc Brake)
Using a 10 mm union nut wrench, disconnect the brake tube while holding the rear brake tube flexible hose with a wrench.
Do not kink or damage the brake line.
Do not allow any foreign matter such as dirt and dust to enter the brake line.
Remove the clip to separate the rear brake tube flexible hose.
Remove the union bolt, gasket and the rear brake tube flexible hose.