Home › Brake › PARKING BRAKE › PARKING BRAKE SYSTEM › 2013.08–2014.03
RM30M0E _54 Brake _017102 PARKING BRAKE _0092771 PARKING BRAKE SYSTEM N

PARKING BRAKE  PARKING BRAKE SYSTEM  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT PARKING BRAKE LEVER TRAVEL

a.

Slowly pull the parking brake lever to the fully applied position, counting the number of clicks.

Parking Brake Lever Travel at 200 N (20 kgf, 45.0 lbf):
Rear Brake Type Number of Clicks
Drum 8 to 11
Disc 4 to 7



Hide 2.ADJUST PARKING BRAKE LEVER TRAVEL (for Rear Drum Brake)


b.

Remove the shoe adjusting hole plug.


c.
C233136C01
0,0 3.427,0 false
V100135

Expand


Turn the adjuster to expand the brake shoe until the drum locks.


d.
C233134C08
0,0 3.427,0 false
V100135

Contract


Hold the automatic adjust lever away from the adjuster, and contract the brake shoe by turning the adjust bolt using another screwdriver until the drum can rotate smoothly.

Standard:

12 notches



e.

Check that there is no brake drag against the brake shoe.


f.
C282403C03
1.083,1.656 1.729,1.281 true 0.938,1.583 1.135,1.781 0.198,0.198 10 false *1
*1 Lock Nut


Turn the lock nut until the parking brake lever travel is corrected to within the specified range.

Parking brake lever travel at 200 N (20 kgf, 45.0 lbf):

8 to 11 clicks


NOTICE:

If the lock nut has been removed from the rod, replace the lock nut with a new one.



g.

Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.



Hide 3.ADJUST PARKING BRAKE LEVER TRAVEL (for Rear Disc Brake)


b.
C282403C03
1.083,1.656 1.729,1.281 true 0.938,1.583 1.135,1.781 0.198,0.198 10 false *1
*1 Lock Nut


Turn the lock nut until the parking brake lever travel is corrected to within the specified range.

Parking brake lever travel at 200 N (20 kgf, 45.0 lbf):

4 to 7 clicks


NOTICE:

If the lock nut has been removed from the rod, replace the lock nut with a new one.



c.

Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.


d.

Check whether the parking brake drags or not.


e.
C282404C01
0.75,1.135 1.427,0.927 true 1.563,0.583 2.406,0.313 true 0.719,0.25 0.875,0.448 0.156,0.198 10 false A 0.583,1.052 0.896,1.208 0.313,0.156 10 false *a 2.438,0.208 2.75,0.365 0.313,0.156 10 false *b
*a Stopper
*b Operation Lever


Release the parking brake lever and check that the clearance measurement between the rear disc brake cylinder operation lever and stopper is within the specified range.

Clearance A:

0 to 0.5 mm (0 to 0.0196 in.)




Hide 4.INSPECT BRAKE WARNING LIGHT

a.

When operating the parking brake lever, check that the brake warning light illuminates.

OK:

Brake warning light always illuminates at the first click.