33504F
1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
33504F
2.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)
58808
3.REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle)
4.REMOVE POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)
58804A
5.REMOVE FRONT CONSOLE UPPER PANEL SUB-ASSEMBLY
85530
6.REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and then turn the No. 1 power outlet socket assembly clockwise and pull the No. 1 power outlet socket assembly halfway out.
| *a | Protrusion |
| *b | Cutout |
Align the protrusion of the No. 1 power outlet socket assembly with the cutout of the No. 1 power outlet socket cover and then pull the No. 1 power outlet socket assembly out.
85535B
7.REMOVE NO. 1 POWER OUTLET SOCKET COVER
Disengage the 2 claws to remove the No. 1 power outlet socket cover.
Perform this procedure only when replacement of the No. 1 power outlet socket cover is necessary.