Use the same procedure for both the RH and LH sides.
The procedure described below is for the LH side.
84233
1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Connect the connector.
Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.
When reusing the front door courtesy light switch assembly, replace the screws with 90166-70001 screws to avoid insecure installation.
62414A
2.INSTALL CENTER PILLAR LOWER GARNISH
62332A
3.CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP
Connect the rear door opening trim weatherstrip.
62312B
4.CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP
Connect the front door opening trim weatherstrip.