Home › General › SPECIFICATIONS › 1NZ-FE ENGINE CONTROL › 2013.08–2014.03
RM30M0E _V1 General _017290 SPECIFICATIONS _0096988 1NZ-FE ENGINE CONTROL F

SPECIFICATIONS  1NZ-FE ENGINE CONTROL  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Camshaft timing oil control valve assembly x Cylinder head sub-assembly 7.5 76 66
No. 2 cylinder head cover x Cylinder head cover sub-assembly 7.0 71 62
Throttle body with motor assembly x Intake manifold 9.0 92 80
Wire harness bracket x Throttle body with motor assembly 9.0 92 80
Water filler bracket x Throttle body with motor assembly 7.5 76 66
No. 1 air cleaner hose x Throttle body with motor assembly 3.0 31 27
ECM x Vehicle 8.0 82 71
Accelerator pedal sensor assembly x Vehicle 5.4 55 48
Mass air flow meter x Air cleaner cap 1.0 10 9
Camshaft position sensor x Cylinder head sub-assembly 8.0 82 71
Crankshaft position sensor x Oil pump assembly 7.5 76 66
Spark plug x Cylinder head sub-assembly 18 184 13
No. 1 ignition coil x Cylinder head cover sub-assembly 9.0 92 80
Engine coolant temperature sensor x Cylinder head sub-assembly 19.6 200 14
Knock sensor x Cylinder block sub-assembly 20 204 15
heated oxygen sensor x Exhaust manifold with SST 40 408 30
without SST 44 449 32
heated oxygen sensor x Front exhaust pipe assembly with SST 40 408 30
without SST 44 449 32