Home › General › SPECIFICATIONS › 2NZ-FE FUEL › 2013.08–2016.10
RM30M0E _V1 General _017290 SPECIFICATIONS _0096993 2NZ-FE FUEL F

SPECIFICATIONS  2NZ-FE FUEL  SERVICE DATA  


Battery Standard voltage 11 to 14 V
Fuel pressure Standard fuel pressure 304 to 343 kPa (3.1 to 3.5 kgf/cm2, 44.1 to 49.7 psi)
Fuel pressure : at fuel pressure remains for 5 minutes after engine has stopped Standard fuel pressure 147 kPa (1.5 kgf/cm2, 21 psi) or more
Fuel injector assembly Standard resistance 11.8 to 12.6 Ω at 25°C (77°F)
Injection volume 47 to 58 cm3 (2.9 to 3.5 cu in.) per 15 seconds
Difference between each fuel injector 11 cm3 (0.7 cu in.) or less
Standard leakage 1 drop or less every 12 minutes
Fuel pump Standard resistance 0.2 to 3.0 Ω at 20°C (68°F)
Fuel sender gauge assembly Standard resistance 13.5 to 16.5 Ω (Float level F)
13.5 to 414.5 Ω (Float level E to F)
405.5 to 414.5 Ω (Float level E)