Home › General › SPECIFICATIONS › 2NZ-FE INTAKE / EXHAUST › 2013.08–2016.10
RM30M0E _V1 General _017290 SPECIFICATIONS _0096997 2NZ-FE INTAKE / EXHAUST F

SPECIFICATIONS  2NZ-FE INTAKE / EXHAUST  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Intake manifold x Cylinder head sub-assembly 30 306 22
Wire harness clamp bracket x Intake manifold 11 112 8
Stud bolt x Intake manifold 4.0 41 35
Exhaust manifold x Cylinder head sub-assembly 27 275 20
Manifold support bracket x Exhaust manifold and Cylinder block sub-assembly 44 449 32
Front floor center brace x Vehicle 30.1 307 22

Part Tightened N*m kgf*cm ft.*lbf
Front exhaust pipe assembly x Exhaust manifold 43 440 32
Front exhaust pipe assembly x Tail exhaust pipe assembly 43 440 32