RM30M0E
_V1
General
_017290
SPECIFICATIONS
_0098436
DRIVE SHAFT / PROPELLER SHAFT
F
SPECIFICATIONS DRIVE SHAFT / PROPELLER SHAFT SERVICE DATA
Front Drive Shaft Assembly
| Front drive shaft assenbly LH length
|
Standard
|
583.6 to 587.6 mm (1.91 to 1.92 ft.)
|
| Front drive shaft assenbly RH length
|
Standard
|
825.6 to 829.6 mm (2.71 to 2.72 ft.)
|
| Outboard joint boot grease capacity
|
Standard
|
125 to 135 g (4.41 to 4.76 oz)
|
| Front drive shaft damper LH distance
|
Standard
|
262.9 to 266.9 mm (10.4 to 10.5 in.)
|
| Front drive shaft damper RH distance for CVT with 1NR-FE
|
Standard
|
490.3 to 494.3 mm (1.61 to 1.62 ft.)
|
| Front drive shaft damper RH distance for CVT with 2NR-FE
|
Standard
|
459.3 to 463.3 mm (1.506 to 1.519 ft.)
|
| Front drive shaft damper RH distance for Manual Transaxle and Automatic Transaxle
|
Standard
|
459.3 to 463.3 mm (1.506 to 1.519 ft.)
|
| Inboard joint boot grease capacity
|
Standard
|
134 to 144 g (4.73 to 5.07 oz)
|