Home › General › SPECIFICATIONS › BRAKE SYSTEM (OTHER) › 2013.08–2017.10
RM30M0E _V1 General _017290 SPECIFICATIONS _0098438 BRAKE SYSTEM (OTHER) F

SPECIFICATIONS  BRAKE SYSTEM (OTHER)  SERVICE DATA  


Brake Pedal (LHD)
Brake pedal height from floor panel - 144 to 154 mm (5.67 to 6.06 in.)
Brake pedal free play - 1.0 to 6.0 mm (0.0394 to 0.236 in.)
Brake pedal reserve distance from floor panel at 300 N (31 kgf, 67.4 lbf) for Rear drum brake (w/ ABS) More than 87 mm (3.43 in.)
for Rear drum brake (w/o ABS) More than 91 mm (3.58 in.)
for Rear disc brake More than 92 mm (3.62 in.)

Brake Pedal (RHD)
Brake pedal height from floor panel - 116.9 to 126.9 mm (4.61 to 4.99 in.)
Brake pedal free play - 1.0 to 6.0 mm (0.0394 to 0.236 in.)
Brake pedal reserve distance from floor panel at 300 N (31 kgf, 67.4 lbf) for Rear drum brake More than 67 mm (2.64 in.)
for Rear disc brake More than 71 mm (2.80 in.)

Brake Master Cylinder
Brake booster push rod clearance Standard 0 mm (0 in.)

Vacuum Switching Valve
Vacuum switching valve assembly resistance
1 - 2 20°C (68°F) 23 to 26 Ω
1 - Body ground Always 10 MΩ or higher
2 - Body ground Always 10 MΩ or higher

Proportioning Valve
Front brake caliper pressure Rear wheel cylinder pressure
Standard fluid pressure 1500 kPa (15.3 kgf/cm2, 218 psi) 1500 kPa (15.3 kgf/cm2, 218 psi)
5000 kPa (51.0 kgf/cm2, 725 psi) 2720 kPa (27.7 kgf/cm2, 394 psi)
8000 kPa (81.6 kgf/cm2, 1160 psi) 3470 kPa (35.4 kgf/cm2, 503 psi)

Brake Fluid
- SAE J1703 or FMVSS No. 116 DOT3