Wear protective gloves. Sharp areas on the parts may injure your hands.
The procedure described below is for the LHD side. Use the same procedure for both the LHD and RHD side, unless otherwise specified.
The procedure described below is for the driver side. Use the same procedure for both the driver and front passenger sides, unless otherwise specified.
71910A
1.REMOVE FRONT SEAT HEADREST ASSEMBLY
Remove the front seat headrest assembly.
73240
2.REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)
for LHD: Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY>REMOVAL
for RHD: Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY>REMOVAL
73230
3.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)
72526A
4.REMOVE RECLINING ADJUSTER RELEASE HANDLE
| *a | Protective Tape |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw to remove the reclining adjuster release handle.
72495
5.REMOVE VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)
Remove the screw and vertical adjusting handle.
71812D
6.REMOVE FRONT SEAT CUSHION SHIELD LH
Disengage the claw, 3 guides and 2 clips to remove the front seat cushion shield LH.
71862
7.REMOVE FRONT SEAT CUSHION INNER SHIELD
Disengage the claw and 3 guides to remove the front seat cushion inner shield.
8.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
for Front Passenger Side:
Disengage the 4 hooks.
Disengage the 3 hooks.
Disengage the 5 hooks.
w/ Vertical Adjuster:
Disengage the 3 hooks to remove the separate type front seat cushion cover with pad.
w/o Vertical Adjuster:
Disengage the 2 hooks to remove the separate type front seat cushion cover with pad.
71072S
9.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
Remove the 2 hog rings.
Remove the 16 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.
10.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Remove the 4 hog rings.
Remove the 3 hog rings.
Disengage the 4 claws to remove the 2 front seat headrest supports.
Remove the separate type front seatback cover with pad from the front seatback frame sub-assembly LH.
71074S
11.REMOVE SEPARATE TYPE FRONT SEATBACK COVER
Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.
71538A
12.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH
Disengage the 2 guides to remove the front seat cushion edge protector LH.
71537G
13.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH
Use the same procedure as for the LH side.
71874
14.REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)
Remove the screw.
Disengage the hook as shown in the illustration.
Disengage the clip to remove the front seat lower cushion shield LH.
71873
15.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (w/ Vertical Adjuster)
Use the same procedure as for the LH side.
71874A
16.REMOVE FRONT SEAT LOWER CUSHION SHIELD (w/ Vertical Adjuster)
Disengage the 2 claws to remove the front seat lower cushion shield.
71014S
17.REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY LH
Remove the 4 bolts and front seatback frame sub-assembly LH from the separate type front seat cushion spring assembly LH.
72211C
18.REMOVE SEAT TRACK ADJUSTING HANDLE
Disengage the 2 springs to remove the seat track adjusting handle from the separate type front seat cushion spring assembly LH.
19.REMOVE SEAT ADJUSTER COVER CAP
Remove the 2 seat adjuster cover caps.