71075B
1.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
71940A
2.REMOVE REAR SEAT HEADREST ASSEMBLY
Remove the 2 rear seat headrest assemblies.
71960B
3.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Rear Center Seat Headrest)
Remove the rear seat center headrest assembly.
72868B
4.REMOVE CENTER ARMREST HINGE COVER (w/ Armrest)
Disengage the claw and 2 guides to remove the center armrest hinge cover.
72830
5.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (w/ Armrest)
Remove the bolt, wave washer and bush.
Disengage the guide to remove the rear seat center armrest assembly.
Remove the bush.
66990
6.REMOVE CUP HOLDER ASSEMBLY (w/ Armrest)
Disengage the 4 guides to remove the cup holder assembly.
73344
7.REMOVE REAR SEAT SHOULDER BELT GUIDE LH (for Sedan LH Side)
Use the same procedure for both sides. (for 3 Point Type Rear Center Seat Belt)
Remove the 2 screws.
Disengage the guide to remove the rear seat shoulder belt guide LH.
73343
8.REMOVE REAR SEAT SHOULDER BELT GUIDE RH (for Sedan RH Side)
Remove the 2 screws.
Disengage the guide to remove the rear seat shoulder belt guide RH.
9.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH (for LH Side)
| *a | Zipper |
| *b | Hook |
Disengage the hook and unfasten the zipper.
w/ Rear Center Seat Headrest:
Disengage the 8 claws to remove the 4 rear seat headrest supports.
w/o Rear Center Seat Headrest:
Disengage the 4 claws to remove the 2 rear seat headrest supports.
Remove the separate type rear seatback cover with pad LH from the rear seatback frame sub-assembly LH.
Using a T40 "TORX" socket wrench, remove the rear seatback lock pin.
10.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH (for RH Side)
| *a | Zipper |
| *b | Hook |
Disengage the hook and unfasten the zipper.
Disengage the 4 claws to remove the 2 rear seat headrest supports.
Remove the separate type rear seatback cover with pad RH from the rear seatback frame sub-assembly RH.
Using a T40 "TORX" socket wrench, remove the rear seatback lock pin.
71078S
11.REMOVE SEPARATE TYPE REAR SEATBACK COVER LH (for LH Side)
w/o Armrest:
Remove the 8 hog rings and separate type rear seatback cover LH from the separate type rear seatback pad LH.
w/ Armrest:
Remove the 16 hog rings and separate type rear seatback cover LH from the separate type rear seatback pad LH.
71077S
12.REMOVE SEPARATE TYPE REAR SEATBACK COVER RH (for RH Side)
Remove the 8 hog rings and separate type rear seatback cover RH from the separate type rear seatback pad RH.