71075B
1.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
71940A
2.REMOVE REAR SEAT HEADREST ASSEMBLY
Remove the 2 rear seat headrest assemblies.
71960B
3.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Rear Center Seat Headrest)
Remove the rear seat center headrest assembly.
4.REMOVE BENCH TYPE REAR SEATBACK COVER WITH PAD
| *a | Zipper |
| *b | Hook |
Disengage the hook and unfasten the 2 zippers.
w/ Rear Center Seat Headrest:
Disengage the 12 claws to remove the 6 rear seat headrest support assemblies.
w/o Rear Center Seat Headrest:
Disengage the 8 claws to remove the 4 rear seat headrest support assemblies.
Remove the bench type rear seatback cover with pad from the rear seatback frame sub-assembly.
Using a T40 "TORX" socket wrench, remove the rear seatback lock pin.
Use the same procedure for both sides.
71077B
5.REMOVE BENCH TYPE REAR SEATBACK COVER
Remove the 16 hog rings and bench type rear seatback cover from the bench type rear seatback pad.