73240
1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Seat LHD)
for 6 Way Seat Type:
| *a | Convex |
Install the front seat inner belt assembly with the nut.
Do not place the front seat inner belt assembly LH over the convex areas of the separate type front seat cushion spring assembly.
Engage the 2 clamps.
Engage the 5 clamps.
Engage the 2 hooks to return the separate type front seat back cover.
Engage the 2 hooks to return the separate type front seat cushion cover.
for 4 Way Seat Type:
| *a | Convex |
Install the front seat inner belt assembly with the nut.
Do not place the front seat inner belt assembly over the convex areas of the separate type front seat cushion spring assembly.
Engage the clamp.
Engage the 4 clamps.
Engage the 4 hooks.
73230
2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Seat RHD)
| *a | Convex |
Install the front seat inner belt assembly with the nut.
42 N*m (428 kgf*cm, 31 ft.*lbf)
Do not place the front seat inner belt assembly RH over the convex areas of the separate type front seat cushion spring assembly.
Engage the clamp.
Engage the 3 clamps.
Engage the 3 hooks.
73230
3.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Seat)
| *a | Convex |
Install the front seat inner belt assembly with the nut.
Do not place the front seat inner belt assembly over the convex areas of the separate type front seat cushion spring assembly.
4.INSTALL FRONT SEAT ASSEMBLY