69350
1.INSPECT BACK DOOR LOCK ASSEMBLY (w/ Wireless Door Lock System)
| *a | Component without harness connected
(Back Door Lock Assembly) |
| *b | Latch |
| *c | LOCK |
| *d | UNLOCK |
Check the operation.
Move the latch of the back door lock assembly to the lock position.
Apply battery voltage and check the operation of the back door lock assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1 (ACT+)
Battery negative (-) → 2 (ACT-) |
Locked → Unlocked |
If the result is not as specified, replace the back door lock assembly.