69350
1.INSTALL BACK DOOR LOCK ASSEMBLY (w/o Wireless Door Lock System)
Make sure to remove the string before installing a new back door lock assembly.
Apply MP grease to the sliding parts of the back door lock assembly.
Install the back door lock assembly with the 2 bolts.
Connect the connector.
Engage the guide and connect the back door lock control assembly.
Connect the back door lock control rod and engage the snap ring as shown in the illustration.
69350
2.INSTALL BACK DOOR LOCK ASSEMBLY (w/ Wireless Door Lock System)
Make sure to remove the string before installing a new back door lock assembly.
Apply MP grease to the sliding parts of the back door lock assembly.
Install the back door lock assembly with the 2 bolts.
Connect the connector.
67751
3.INSTALL BACK DOOR TRIM BOARD