Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT › 2014.03–2017.10
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0116784 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  INSTALLATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 68948 1.INSTALL BACK DOOR DAMPER STAY LOWER BRACKET

a.

Clean the threaded portion on the vehicle body with a non-residue solvent.


b.

Apply adhesive to the threads of the 2 bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the back door damper stay lower bracket with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 68946 2.INSTALL BACK DOOR DAMPER STAY UPPER BRACKET

a.

Clean the threaded portion on the vehicle body with a non-residue solvent.


b.

Apply adhesive to the threads of the 2 bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the back door damper stay upper bracket with the 2 bolts.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)


Hide 68960B 3.INSTALL BACK DOOR STAY ASSEMBLY

NOTICE:
·

Avoid touching the stroke portions of the rod as much as possible to prevent foreign matter from attaching to the stroke portions. Be sure to hold the cylinders while servicing.

·

Do not wear cotton gloves or other similar materials when handling the rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any load to the cylinders in the horizontal direction, in order to prevent the rod from being deformed.



a.
B348631

Install the back door stay assembly on the 2 ball joints.

NOTICE:

Install the back door stay assembly while supporting the back door by hand.



b.

Engage the 2 stop rings.