53141F
1.REMOVE RADIATOR COVER
Remove the 8 clips and the radiator cover.
53101
2.REMOVE RADIATOR GRILLE SUB-ASSEMBLY
| *1 | Hood Center Cushion |
Remove the 2 clips.
Remove the hood center cushion.
Disengage the 8 claws and remove the radiator grille sub-assembly.
3.REMOVE FRONT BUMPER ASSEMBLY
|
Protective Tape |
Apply protective tape, as shown in the illustration.
| *1 | Pin Hold Clip |
| *a | 90° |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
Use the same procedure for the LH side and RH side.
Remove the clip.
Use the same procedure for the LH side and RH side.
Remove the 6 screws.
Using a clip remover, remove the 3 clips.
Disengage the 8 claws and remove the front bumper assembly.
w/o Fog Light:
Disengage the 8 claws and remove the front bumper assembly.
w/ Fog Light:
Disengage the 8 claws and separate the front bumper assembly.
Disconnect the 2 connectors and remove the front bumper assembly.
Remove the 2 nuts.