52521A
1.REMOVE FRONT BUMPER RETAINER CLIP
Remove the front bumper retainer clip.
Use the same procedure for the LH side and RH side.
53879A
2.REMOVE FRONT FENDER LINER RETAINER
Remove the front fender liner retainer.
Use the same procedure for the LH side and RH side.
3.REMOVE GROMMET
Remove the 4 grommets.
75311
4.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
Disengage the 3 claws, 2 guides and remove the radiator grille (or front panel) emblem.
52127C
5.REMOVE FRONT BUMPER HOLE COVER
Disengage the 3 claws and guide.
Disengage the claw and remove the front bumper hole cover.
52113
6.REMOVE FRONT BUMPER BAR LH
Disengage the 4 claws and remove the front bumper bar LH.
52112
7.REMOVE FRONT BUMPER BAR RH
Use the same procedure as for the LH side.
53112E
8.REMOVE LOWER NO. 1 RADIATOR GRILLE
Disengage the 21 claws and remove the lower No. 1 radiator grille.
81220
9.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
Remove the 2 screws.
Disengage the guide and remove the fog light assembly LH.
81210A
10.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure as for the LH side.
52128B
11.REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)
Disengage the 7 claws and remove the front bumper hole cover LH.
52127D
12.REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)
Use the same procedure as for the LH side.
52128B
13.REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)
Disengage the 7 claws and remove the front bumper hole cover LH.
52127D
14.REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)
Use the same procedure as for the LH side.
52536
15.REMOVE FRONT BUMPER SIDE RETAINER LH
Remove the bolt and screw.
Disengage the 2 claws and remove the front bumper side retainer LH.
52535
16.REMOVE FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
88891H
17.REMOVE NO. 1 COOLER COVER (w/ No. 1 Cooler Cover)
Remove the 2 clips.
Disengage the 2 guides and remove the No. 1 cooler cover.
88790B
18.REMOVE THERMISTOR ASSEMBLY (for Air Conditioning)
53286B
19.REMOVE NO. 2 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)
w/ Projector Headlight:
Disengage the clamp and separate the wire harness.
Disconnect the connector.
Remove the clip.
w/o Projector Headlight:
Disengage the clamp and separate the wire harness.
Disconnect the 2 connectors.
Remove the clip.
Disengage the 2 claws and remove the No. 2 radiator side air seal.
53285B
20.REMOVE NO. 1 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)
Use the same procedure as for the No. 2 radiator side air seal side.
53286B
21.REMOVE NO. 2 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)
w/o Projector Headlight:
Disengage the clamp and separate the wire harness.
Disconnect the 2 connectors.
Remove the clip.
w/ Projector Headlight:
Disengage the clamp and separate the wire harness.
Disconnect the connector.
Remove the clip.
Disengage the 3 claws and remove the No. 2 radiator side air seal.
53285B
22.REMOVE NO. 1 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)
Use the same procedure as for the No. 2 radiator side air seal side.
52611
23.REMOVE FRONT BUMPER ENERGY ABSORBER (w/ Energy Absorber)
Disengage the 2 guides and remove the front bumper energy absorber.
53288B
24.REMOVE RADIATOR SUPPORT EXTENSION LH
Remove the clip.
Disengage the 2 claws and remove the radiator support extension LH.
53287B
25.REMOVE RADIATOR SUPPORT EXTENSION RH
Use the same procedure as for the LH side.
52021
26.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (for LHD)
Disengage the 4 clamps and separate the wire harness.
Remove the 5 nuts and the front bumper reinforcement sub-assembly.
52021
27.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY (for RHD)
Disengage the 3 clamps and separate the wire harness.
Remove the 5 nuts and the front bumper reinforcement sub-assembly.