52592
1.REMOVE REAR BUMPER SIDE SEAL LH
Using a clip remover, remove the clip.
Remove the 2 screw grommets and the rear bumper side seal LH.
52591
2.REMOVE REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.
3.REMOVE REAR BUMPER ASSEMBLY
|
Protective Tape |
Apply protective tape as shown in the illustration.
Remove the 2 clips.
Remove the 2 clips and 2 screws.
Disengage the 8 claws.
Disengage the 4 claws and remove the rear bumper assembly.