Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING(for Hatchback) › from 2014.03
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0118072 ROOF DRIP SIDE FINISH MOULDING(for Hatchback) A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING(for Hatchback)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the LH and RH side.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 75552E 1.REMOVE ROOF DRIP SIDE FINISH MOULDING

a.
B348154
0,0 0,0 false
V100155

Protective Tape


Apply protective tape as shown in the illustration.


b.
B348155

Disengage the 2 clips and remove the roof drip side finish moulding.

NOTICE:
·

Do not remove the No. 1 roof drip side finish moulding clips.

·

If any No. 1 roof drip side finish moulding clip is damaged or falls out, replace it with a new one.