Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for Hatchback) › 2014.03–2017.10
RM30M0E _59 Vehicle Exterior _017126 LIGHTING (EXT) _0120181 HEADLIGHT ASSEMBLY(for Hatchback) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Hatchback)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81610F 1.INSTALL CLEARANCE LIGHT BULB (w/o Projector Headlight)

a.

Install the clearance light bulb to the clearance light socket.


b.
E272697

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81610F 2.INSTALL CLEARANCE LIGHT BULB (w/ Projector Headlight)

a.

Install the clearance light bulb to the clearance light socket.


b.
E272698

Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81510C 3.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.

Install the front turn signal light bulb to the front turn signal light socket.


b.
E272699

Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81110B 4.INSTALL NO. 1 HEADLIGHT BULB (w/o Projector Headlight)

a.
E289139

Install the No. 1 headlight bulb.

NOTICE:

Do not touch the No. 1 headlight bulb glass.



b.
E289140N01
1.208,0.052 1.427,0.302 0.219,0.25 10 true (1) 2.25,1.635 2.469,1.885 0.219,0.25 10 true (2)

Lock the set spring in the direction indicated by the arrow in the order shown in the illustration.


c.
E289137

Install the socket cover.


Hide 81110B 5.INSTALL NO. 1 HEADLIGHT BULB (w/ Projector Headlight)

a.
E272701

Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.

NOTICE:

Do not touch the No. 1 headlight bulb glass.



b.
E272689

Connect the connector.


c.
E272702

Turn the socket cover in the direction indicated by the arrow show in the illustration to install it.