Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PRESSURE SENSOR(for 1NZ-FE, 2NZ-FE) › 2014.03–2016.10
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0090067 AIR CONDITIONING PRESSURE SENSOR(for 1NZ-FE, 2NZ-FE) A

HEATING / AIR CONDITIONING  AIR CONDITIONING PRESSURE SENSOR(for 1NZ-FE, 2NZ-FE)  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 88645H 2.REMOVE NO. 1 PRESSURE SWITCH (for Sedan)

a.
I109794

Disconnect the connector.


b.
I109732C01
0.906,0.573 0.729,0.25 true 1.417,1.708 1.938,1.906 true 0.615,0.073 0.927,0.271 0.313,0.198 10 true *a 1.969,1.844 2.177,2.042 0.208,0.198 10 true *b
*a Turn
*b Hold


Hold the liquid tube sub-assembly A.


c.

Using a 27 mm deep socket wrench, remove the No. 1 pressure switch.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.



Hide 88645H 3.REMOVE NO. 1 PRESSURE SWITCH (for Hatchback)

a.
I109794

Disconnect the connector.


b.
I110310C01
1.896,1.802 2.135,1.927 true 0.583,0.771 0.792,0.354 true 2.188,1.896 2.5,2.094 0.313,0.198 10 true *b 0.75,0.167 0.948,0.365 0.198,0.198 10 true *a
*a Turn
*b Hold


Hold the liquid tube sub-assembly A.


c.

Using SST, remove the No. 1 pressure switch.

SST
09816-30010  

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.