88645H
1.INSTALL NO. 1 PRESSURE SWITCH (for Sedan)
Remove the vinyl tape from the liquid tube sub-assembly A.
Apply sufficient compressor oil to the O-ring of a new No. 1 pressure switch and connecting surface.
ND-OIL 8 or equivalent
| *a | Turn |
| *b | Hold |
Hold the liquid tube sub-assembly A.
Using a 27 mm deep socket wrench, install the No. 1 pressure switch.
Connect the connector.
88645H
2.INSTALL NO. 1 PRESSURE SWITCH (for Hatchback)
Remove the vinyl tape from the liquid tube sub-assembly A.
Apply sufficient compressor oil to the O-ring of a new No. 1 pressure switch and connecting surface.
ND-OIL 8 or equivalent
| *a | Turn |
| *b | Hold |
Hold the liquid tube sub-assembly A.
Using SST, install the No. 1 pressure switch.
Connect the connector.
3.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT
4.WARM UP ENGINE
5.INSPECT FOR REFRIGERANT LEAK