Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM › from 2016.04
RM30M0E _54 Brake _017098 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0256246 VEHICLE STABILITY CONTROL SYSTEM U

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM  FAIL-SAFE CHART  


FAIL-SAFE OPERATION


·

If there is a problem with sensor signals or actuator systems, the skid control ECU (brake actuator assembly) prohibits power supply to the brake actuator assembly and informs the ECM of VSC system failure.

The brake actuator assembly turns off each solenoid and the ECM shuts off VSC control (traction control signal) from the skid control ECU (brake actuator assembly) accordingly, which turns out to be as if the ABS, TRC and VSC systems were not installed.

The ABS control will be prohibited, but EBD control will continue as much as possible. If EBD control is impossible, the brake warning light will come on to warn the driver.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DIAGNOSIS SYSTEM

·

If system components have any malfunctions before starting control, operation stops immediately. If system components have any malfunctions during control, control gradually stops so as not to trigger a sudden change in vehicle conditions.

If it is impossible to control the systems, the warning light comes on to inform the driver of termination of the systems.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DIAGNOSIS SYSTEM

HINT:

If the brake booster encounters a malfunction, brake performance is gradually lost and ABS, BA, TRC and VSC systems are prohibited.



ABS, EBD and BA Systems
Malfunction Area Control Method
ABS system ABS, BA, TRC and VSC control prohibited
BA system ABS, BA, TRC and VSC control prohibited
EBD system ABS, EBD, BA, TRC and VSC control prohibited

TRC and VSC Systems
Malfunction Area Control Method
Engine control system
(TRC and VSC systems)
Before control: Disables control
During control: Uses only the brakes to perform control
Brake control system
(VSC system)
Before control: Disables control
During control: Uses only the engine to perform control
Brake control system
(TRC system)
Before control: Disables control
During control: Disables control (by gradually ending control)