Home › Drivetrain › K312 CVT › CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM › 2016.04–2017.10
RM30M0E _52 Drivetrain _052969 K312 CVT _0256556 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM U

K312 CVT  CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM  TERMINALS OF ECM  


ECM


A371911E07
0.625,0.417 1.125,0.667 0.5,0.25 1.99,0.417 2.49,0.667 0.5,0.25 3.365,0.417 3.865,0.667 0.5,0.25 4.677,0.417 5.177,0.667 0.5,0.25 5.979,0.417 6.479,0.667 0.5,0.25 0.76,0.458 1.219,0.656 0.458,0.198 10 false B46 2.135,0.458 2.594,0.656 0.458,0.198 10 false B47 3.5,0.458 3.958,0.656 0.458,0.198 10 false B48 4.781,0.458 5.24,0.656 0.458,0.198 10 false F130 6.073,0.458 6.531,0.656 0.458,0.198 10 false F131

HINT:

The standard voltage and resistance of each pair of ECM terminals is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.

Use the illustration above as a reference for the ECM terminals.


Terminal No.(Symbol) Wiring Color Terminal Description Condition Specified Condition
F131-3 (BATT) - B46-3 (E1) G - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
F131-1 .(+B) - B46-3 (E1) R - W-B Power source of ECM Ignition switch ON 11 to 14 V
F131-2 (+B2) - B46-3 (E1) R - W-B Power source of ECM Ignition switch ON 11 to 14 V
F130-13 (CANH) - B46-3 (E1) BE - W-B CAN communication line Ignition switch ON Pulse generation
B47-15 (NSW) - B46-3 (E1) W - W-B Park/neutral position switch signal Ignition switch ON and shift lever in P or N Below 1 V
Ignition switch ON and shift lever not in P or N 11 to 14 V
F130-14 (CANL) - B46-3 (E1) W - W-B CAN communication line Ignition switch ON Pulse generation
F130-6 (MREL) - B46-3 (E1) L - W-B EFI relay Ignition switch ON 11 to 14 V
B48-30 (S) - B46-3(E1) V - W-B M position switch signal Ignition switch ON and shift lever in M 11 to 14 V
Ignition switch ON and shift lever in any position except M Below 1 V
B48-17 (SFTU) - B46-3 (E1) R - W-B Up shift position switch signal Ignition switch ON and shift lever in M 11 to 14 V
Ignition switch ON and shift lever heldin "+" (Up shift) Below 1 V
B48-27 (SFTD) - B46-3 (E1) L - W-B Down shift position switch signal Ignition switch ON and shift lever in M 11 to 14 V
Ignition switch ON and shift lever heldin "-" (Down shift) Below 1 V
B46-5 (+BM) - B46-3 (E1) R - W-B Power source of ECM Always 11 to 14 V
B48-7 (SLP+) - B48-6 (SLP-) G - LG Shift solenoid valve SLP signal Engine idling Pulse generation
B48-11 (SC) - B46-3 (E1) BE - W-B Shift solenoid valve SC signal
·

For 1 second after moving shift lever from P to D or R, or N to D or R

·

Lock-up ON to OFF


Pulse generation
B48-2 (SLU+) - B48-1 (SLU-) SB - GR Shift solenoid valve SLU signal Lock-up turned from OFF to ON Pulse generation
B48-5 (SLS+) - B48-4 (SLS-) GR - P Shift solenoid valve SLS signal Engine idling Pulse generation
B46-3 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω
F130-8 (R) - B46-3 (E1) GR - W-B R position switch signal Ignition switch ON and shift lever in R 11 to 14 V
Ignition switch ON and shift lever not in R Below 1 V
F130-18 (D) - B46-3 (E1) L - W-B D position switch signal Ignition switch ON and shift lever in D 11 to 14 V
Ignition switch ON and shift lever not in D Below 1 V
B47-12 (SL) - B46-3 (E1) W - W-B Shift solenoid valve SL signal Lock-up operating Pulse generation
B48-24 (N) - B46-3(E1) V - W-B N position switch signal Ignition switch ON and shift lever in N 11 to 14 V
Ignition switch ON and shift lever not in N Below 1 V
B48-25 (P) - B46-3(E1) P - W-B P position switch signal Ignition switch ON and shift lever in P 11 to 14 V
Ignition switch ON and shift lever not in P Below 1 V
F130-24 (PTO) - F130-31 (EPTO) L - BE Oil pressure sensor signal Engine idling with shift lever in P 0.8 to 1.2 V
F130-32 (VCPT) - F130-31 (EPTO) V - BE Power supply for oil pressure sensor Ignition switch ON 4.75 to 5.25 V
B48-32 (NIN+) - B48-31 (NIN-) Y - LG Transmission revolution sensor (NIN) signal When driving with shift lever in D Pulse generation
B48-19 (NTO) - B46-3 (E1) G - W-B Transmission revolution sensor (NT) signal When driving with shift lever in D Pulse generation
B48-29 (NTB) - B46-3 (E1) BR - W-B Power supply for transmission revolution sensor (NT) Ignition switch ON 11 to 14 V
B47-9 (NOTO) - B46-3 (E1) L - W-B Transmission revolution sensor (NOUT) signal When driving with shift lever in D Pulse generation
B47-10 (NOTB) - B46-3 (E1) G - W-B Power supply for transmission revolution sensor (NOUT) Ignition switch ON 11 to 14 V
B48-20 (THO1) - B48-21 (ETHO) Y - B CVT fluid temperature sensor signal CVT fluid temperature: 60 to 120°C (140 to 248°F) 0.2 to 1.0 V