53141F
1.REMOVE RADIATOR COVER
Remove the 8 clips and radiator cover.
53101
2.REMOVE RADIATOR GRILLE SUB-ASSEMBLY
| *1 | Hood Center Cushion |
Remove the 4 clips.
Remove the hood center cushion.
Disengage the 6 claws to remove the radiator grille sub-assembly.
3.REMOVE FRONT BUMPER ASSEMBLY
|
Protective Tape |
Apply protective tape as shown in the illustration.
| *1 | Pin Hold Clip |
| *a | 90° |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
When removing the pin hold clips, turn the steering wheel right and left to ensure enough space to work.
Use the same procedure for the RH side and LH side.
Remove the clip.
Use the same procedure for the RH side and LH side.
Remove the 6 screws.
Using a clip remover, remove the 3 clips.
Disengage the 8 claws.
w/ Fog Light:
Disconnect the connector.
Use the same procedure for the RH side and LH side.
w/ Daytime Running Light:
Disconnect the connector.
Use the same procedure for the RH side and LH side.
Remove the front bumper assembly.
Remove the 2 nuts.