Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER(for Sedan) › 2016.04–2017.10
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0092434 FRONT BUMPER(for Sedan) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for Sedan)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT BUMPER ASSEMBLY

a.

Install the 2 nuts.


b.

w/ Daytime Running Light:

i.

Connect the connector.

HINT:

Use the same procedure for the RH side and LH side.




c.

w/ Fog Light:

i.

Connect the connector.

HINT:

Use the same procedure for the RH side and LH side.




d.
B342269

Engage the 8 claws to install the front bumper assembly.


e.

Install the 3 clips.


f.

Install the 6 screws.


g.
B342267C02
1.188,1.99 1.656,1.708 true 2.042,3.125 2.25,3.323 0.208,0.198 10 false *a 1.688,1.573 1.896,1.771 0.208,0.198 10 false *1 2.823,3.146 3.031,3.344 0.208,0.198 10 false *b
*1 Pin Hold Clip
*a Correct
*b Incorrect


Install the pin hold clip as shown in the illustration.

NOTICE:
·

Insert the pin hold clip with the slot aligned vertically.

·

Do not rotate the clip after inserting it.

·

After installation, confirm that the slot is aligned vertically.



HINT:

Use the same procedure for the RH side and LH side.



h.

Install the clip.

HINT:

Use the same procedure for the RH side and LH side.



i.

Remove the protective tape.


Hide 53101 2.INSTALL RADIATOR GRILLE SUB-ASSEMBLY

a.

Engage the 6 claws to install the radiator grille sub-assembly.


b.

Install the hood center cushion.


c.

Install the 4 clips.


Hide 53141F 3.INSTALL RADIATOR COVER

a.

Install the radiator cover with the 8 clips.


Hide 4.ADJUST FOG LIGHT AIMING (w/ Fog Light)