Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1NR-FE, 2NR-FE) › from 2016.04
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0259840 COMPRESSOR(for 1NR-FE, 2NR-FE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 1NR-FE, 2NR-FE)  INSPECTION  


PROCEDURE

Hide 88320 1.INSPECT COOLER COMPRESSOR WITH PULLEY ASSEMBLY

a.

Inspect the cooler compressor with pulley assembly.

i.
I112143C01
0.063,0.104 0.375,0.26 0.313,0.156 10 false *a
*a Component without harness connected
(Magnet Clutch Assembly)


Apply battery voltage to the clutch and check the operation of the clutch.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Magnet clutch is engaged


If the result is not as specified, replace the cooler compressor with pulley assembly.