Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PRESSURE SENSOR(for 1NR-FE, 2NR-FE) › from 2016.04
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0259841 AIR CONDITIONING PRESSURE SENSOR(for 1NR-FE, 2NR-FE) A

HEATING / AIR CONDITIONING  AIR CONDITIONING PRESSURE SENSOR(for 1NR-FE, 2NR-FE)  INSTALLATION  


PROCEDURE

Hide 88719A 1.INSTALL AIR CONDITIONER PRESSURE SENSOR

a.

Remove the vinyl tape from the No. 1 cooler refrigerant suction hose and the connecting part of the air conditioner pressure sensor.


b.

Apply sufficient compressor oil to a new air conditioner pressure sensor and connecting surface.

Compressor Oil:

ND-OIL 8 or equivalent



c.
I112209C01
0.698,1.708 1.656,1.656 true 2.802,0.854 3.063,0.677 true 3.115,0.583 3.427,0.781 0.313,0.198 10 false *a 0.51,1.625 0.823,1.823 0.313,0.198 10 false *b
*a Turn
*b Hold


Using a 27 mm deep socket wrench, install the air conditioner pressure sensor.

Torque:
10.8 N*m (110 kgf*cm, 8 ft.*lbf)


d.

Connect the connector.


Hide 2.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT