Home › Drivetrain › K411 CVT › OIL PAN › from 2016.04
RM30M0E _52 Drivetrain _052750 K411 CVT _0259918 OIL PAN A

K411 CVT  OIL PAN  INSTALLATION  


PROCEDURE

Hide 35394D 1.INSTALL OIL CLEANER (CVT) MAGNET

a.
C266001C03
1.635,1.427 2.938,0.802 2.938,0.802 1.99,1.49 true 2.958,0.688 3.271,0.844 0.313,0.156 10 false *1
*1 Oil Cleaner (CVT) Magnet


Install the 2 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly as shown in the illustration.


Hide 35106L 2.INSTALL TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY

a.

Clean and degrease the installation surfaces of the transaxle oil (CVT) pan sub-assembly and continuously variable transaxle assembly.


b.

Install a new transaxle oil (CVT) pan gasket and transaxle oil (CVT) pan sub-assembly to the continuously variable transaxle assembly with the 15 bolts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


c.

Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

Torque:
0.8 N*m (8 kgf*cm, 7 in.*lbf)


d.

Temporarily install the gasket and overflow plug to the transaxle oil (CVT) pan sub-assembly.

HINT:

Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.



Hide 3.ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

Hide 4.INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK

Hide 51442C 5.INSTALL ENGINE UNDER COVER LH (w/o Metal Type Under Cover)

Hide 51405A 6.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)

Hide 51451A 7.INSTALL CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)