Home › Drivetrain › K411 CVT › OIL PRESSURE SENSOR › from 2016.04
RM30M0E _52 Drivetrain _052750 K411 CVT _0259921 OIL PRESSURE SENSOR A

K411 CVT  OIL PRESSURE SENSOR  REMOVAL  


PROCEDURE

Hide 51442C 1.REMOVE ENGINE UNDER COVER LH (w/o Metal Type Under Cover)

Hide 51451A 2.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)

Hide 89637K 4.REMOVE OIL PRESSURE SENSOR

a.
C234036

Disconnect the oil pressure sensor connector.


b.
C234037N03
1.885,1.594 1.938,1.823 false 1.813,1.833 2.156,2.031 0.344,0.198 10 false SST

Using SST, remove the oil pressure sensor from the continuously variable transaxle assembly.

SST
09268-46012