23280J
1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
Apply gasoline to a new O-ring and install it to the fuel pressure regulator assembly.
Do not twist the O-ring.
Install the fuel pressure regulator assembly to the No. 1 fuel suction support.
77175
2.INSTALL NO. 2 FUEL SUCTION SUPPORT
Engage the 3 claws and clamp to install the No. 2 fuel suction support to the No. 1 fuel suction support.
77174
3.INSTALL NO. 1 FUEL SUCTION SUPPORT
Apply gasoline to a new O-ring and install it to the fuel suction tube assembly.
Engage the 5 claws to install the No. 1 fuel suction support to the fuel suction tube assembly.
23221
4.INSTALL FUEL PUMP
77785
5.INSTALL FUEL PUMP HARNESS
83320
6.INSTALL FUEL SENDER GAUGE ASSEMBLY
77020A
7.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY