Home › Engine / Hybrid System › 1NR-FE COOLING › RADIATOR › 2016.04–2016.07
RM30M0E _51 Engine / Hybrid System _053564 1NR-FE COOLING _0259962 RADIATOR A

1NR-FE COOLING  RADIATOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Be sure that the ignition switch is off if you work near the electric cooling fans or radiator grille. With the ignition switch ON, the electric cooling fans may automatically start to run if the engine coolant temperature is high and/or the air conditioning is on (w/ air conditioning system).


PROCEDURE

Hide 81150 1.REMOVE HEADLIGHT ASSEMBLY LH

Hide 81150 2.REMOVE HEADLIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 53510 4.REMOVE HOOD LOCK ASSEMBLY (for LHD)

Hide 53510 5.REMOVE HOOD LOCK ASSEMBLY (for RHD)

Hide 53215B 6.REMOVE HOOD LOCK SUPPORT

a.
A300055

Disengage the clamp to disconnect the wire harness from the hood lock support.


b.

Remove the 2 bolts and hood lock support from the radiator support assembly.


Hide 89173 8.REMOVE FRONT AIRBAG SENSOR (w/ Airbag System)

Hide 53216A 9.REMOVE UPPER RADIATOR SUPPORT

a.
A313077

Disengage the clamp to separate the hood lock control cable assembly from the upper radiator support.


b.
A381690

Disengage the 3 clamps to disconnect the wire harness from the upper radiator support.


c.
A381697

Disconnect the low pitched horn assembly connector.


d.
A381698

Remove the 4 bolts and upper radiator support from the radiator support assembly.


Hide 10.DISCONNECT RADIATOR RESERVOIR TANK HOSE

a.
A381699

Disconnect the radiator reservoir tank hose from the radiator assembly.


Hide 16571C 11.DISCONNECT NO. 1 RADIATOR HOSE

a.
A381700

Slide the hose clip and disconnect the No. 1 radiator hose from the radiator assembly.


Hide 16572D 12.DISCONNECT NO. 2 RADIATOR HOSE

A313061

a.

Slide the hose clip and disconnect the No. 2 radiator hose from the radiator assembly.


Hide 16400 13.REMOVE RADIATOR ASSEMBLY (w/ Cooler System)

a.
A381691

Disconnect the cooling fan motor connector.


b.

Disengage the 3 clamps to disconnect the wire harness from the fan shroud.


c.
A313087

Disengage the 2 claws and 2 guides to separate the cooler condenser assembly from the radiator assembly.

HINT:

While tilting the cooler condenser assembly toward the front of the vehicle, separate the cooler condenser assembly from the radiator assembly.



d.

Remove the radiator assembly together with fan shroud from the vehicle.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or piping when removing the radiator assembly.



Hide 16400 14.REMOVE RADIATOR ASSEMBLY (w/o Cooler System)

a.
A381691

Disconnect the cooling fan motor connector.


b.

Disengage the 3 clamps to disconnect the wire harness from the fan shroud.


c.

Remove the radiator assembly together with fan shroud from the vehicle.


Hide 16711 15.REMOVE FAN SHROUD

a.
A381284

Disengage the 2 claws and 3 guides to remove the fan shroud from the radiator assembly.


Hide 16523A 16.REMOVE RADIATOR SUPPORT CUSHION

A381277

a.

Remove the 2 radiator support cushions from the radiator assembly.


Hide 16535 17.REMOVE LOWER RADIATOR SUPPORT

A381278

a.

Remove the 2 lower radiator supports from the radiator assembly.


Hide 18.REMOVE RADIATOR DRAIN COCK PLUG

A381279

a.

Remove the radiator drain cock plug from the radiator assembly.

NOTICE:

Replace the O-ring if it is damaged.



Hide 16561 19.REMOVE NO. 1 RADIATOR TO SUPPORT SEAL

HINT:

This procedure is only performed when replacing the No. 1 radiator to support seal with a new one.


a.
A349814

Remove the No. 1 radiator to support seal for upper side from the radiator assembly.


b.
A381297

Remove the No. 1 radiator to support seal for lower side from the radiator assembly.