16363
1.INSPECT COOLING FAN MOTOR
Disconnect the cooling fan motor connector.
Check that the motor operates smoothly when battery voltage is applied to the cooling fan motor connector.
| *a | Component without harness connected
(Cooling Fan Motor) |
Connect the positive (+) lead from a battery to terminal 1 and negative (-) lead to terminal 2, and check the cooling fan motor operates smoothly.
If the cooling fan motor does not operate smoothly, replace the cooling fan motor.
Check the current.
Measure the current while the motor is operating.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| Positive (+) Battery Terminal - 2 | 20°C (68°F) | 12.4 to 15.4 A |
If the result is not as specified, replace the cooling fan motor.
Connect the cooling fan motor connector.