Home › Drivetrain › K312 CVT › OIL PAN › from 2016.04
RM30M0E _52 Drivetrain _052969 K312 CVT _0259991 OIL PAN A

K312 CVT  OIL PAN  REMOVAL  


PROCEDURE

Hide 51442C 1.REMOVE ENGINE UNDER COVER LH (w/o Metal Type Under Cover)

Hide 51451A 2.REMOVE CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)

Hide 4.DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID

a.
C264233

Remove the refill plug and gasket from the rear transaxle case.


b.
C264234

Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the transaxle oil (CVT) pan sub-assembly and drain the fluid.


c.
C264235C08
2.438,0.323 2.667,0.563 true 2.292,0.25 2.563,0.448 0.271,0.198 10 false *1
*1 No. 1 Transmission Oil Filler Tube


Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil (CVT) pan sub-assembly and drain the fluid.


d.

Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

Torque:
1.7 N*m (17 kgf*cm, 15 in.*lbf)


e.

Using a 6 mm hexagon socket wrench, temporarily install the overflow plug and gasket to the transaxle oil (CVT) pan sub-assembly.

HINT:

Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.



f.

Temporarily install the refill plug and gasket to the rear transaxle case.

HINT:

Reuse the old gasket as the refill plug will be removed again to adjust the fluid level.



Hide 35106L 5.REMOVE TRANSAXLE OIL(CVT) PAN SUB-ASSEMBLY

a.
C264244

Remove the 16 bolts, transaxle oil (CVT) pan sub-assembly and transaxle oil pan (CVT) gasket from the transaxle case.


b.

Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the transaxle oil (CVT) pan sub-assembly.


c.

Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil (CVT) pan sub-assembly.


Hide 35394D 6.REMOVE OIL CLEANER(CVT) MAGNET

a.
C151669C02
1.156,1.396 0.323,0.646 0.323,0.646 2.135,0.729 true 2.01,1.323 0.354,0.667 true 0.167,0.563 0.479,0.719 0.313,0.156 10 false *1
*1 Oil Cleaner (CVT) Magnet


Remove the 3 oil cleaner (CVT) magnets from the transaxle oil (CVT) pan sub-assembly.


b.

Clean off any metal particles adhered to the 3 oil cleaner (CVT) magnets.


c.

Clean the transaxle oil (CVT) pan sub-assembly and remove any metal particles, sludge, etc.