Home › Drivetrain › K312 CVT › OIL PAN › from 2016.04
RM30M0E _52 Drivetrain _052969 K312 CVT _0259991 OIL PAN A

K312 CVT  OIL PAN  INSTALLATION  


PROCEDURE

Hide 35394D 1.INSTALL OIL CLEANER(CVT) MAGNET

a.
C151669C02
1.156,1.396 0.323,0.646 0.323,0.646 2.135,0.729 true 2.01,1.323 0.354,0.667 true 0.167,0.563 0.479,0.719 0.313,0.156 10 false *1
*1 Oil Cleaner (CVT) Magnet


Install the 3 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly as shown in the illustration.


Hide 35106L 2.INSTALL TRANSAXLE OIL(CVT) PAN SUB-ASSEMBLY

a.

Clean the transaxle oil (CVT) pan sub-assembly installation surface of the transaxle case.


b.

Install the transaxle oil (CVT) pan sub-assembly and a new transaxle oil pan (CVT) gasket to the transaxle case with the 16 bolts.

Torque:
7.8 N*m (80 kgf*cm, 69 in.*lbf)


c.

Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

Torque:
1.7 N*m (17 kgf*cm, 15 in.*lbf)


d.

Using a 6 mm hexagon socket wrench, temporarily install the overflow plug and gasket to the transaxle oil (CVT) pan sub-assembly.

HINT:

Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.



Hide 3.ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

Hide 4.INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK

Hide 51442C 5.INSTALL ENGINE UNDER COVER LH (w/o Metal Type Under Cover)

Hide 51405A 6.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Metal Type Under Cover)

Hide 51451A 7.INSTALL CENTER ENGINE UNDER COVER (w/ Metal Type Under Cover)